--- In "noone_1983" <> wrote:
> I was wondering if anyone had any experience controlling hardware
> (in this case a servo) with the board that needed to have precision
> timing. The signal I generate on the output pin has to be a very
> precisely timed series of pulses, and the nanosleep function just
> doesn't seem to cut it running on the board. Any ideas?
I'm currently developing a DSP add-on card for the TS-7200. At present
I'm interfacing a New Micros IsoPod via a CPLD to the PC/104 bus. This
card handles real-time encoder/analgue/PWM/etc. signals for the Linux
box without me needing to sweat too much with Linux.
Eventually I'll be embedding the DSP CPU directly onto the card (MkII)
and it may become available to other people.
Regards,
PJE
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|