[ts-7000] Precision Timing

ts-7000

[ts-7000] Precision Timing

from [noone_1983]

To:
Subject:	[ts-7000] Precision Timing
From:	"noone_1983" <>
Date:	Sun, 20 Mar 2005 02:18:33 -0000


Hey everyone,
  I was wondering if anyone had any experience controlling hardware
(in this case a servo) with the board that needed to have precision
timing.  The signal I generate on the output pin has to be a very
precisely timed series of pulses, and the nanosleep function just
doesn't seem to cut it running on the board.  Any ideas?

Thanks,
Sajendra N.





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Precision Timing, noone_1983 <= Re: [ts-7000] Precision Timing, Jim Jackson Re: [ts-7000] Precision Timing, Ricardo Wiggers Re: [ts-7000] Precision Timing, kurniadi [ts-7000] Re: Precision Timing, PeterElliot Re: [ts-7000] Precision Timing, Ben Lau Re: [ts-7000] Precision Timing, Grant Stockly

Previous by Date:	[ts-7000] Re: Serial problems, Jamey
Next by Date:	[ts-7000] USB and CF slot on TS-Linux, dws9248
Previous by Thread:	[ts-7000] Serial problems, Jamey
Next by Thread:	Re: [ts-7000] Precision Timing, Jim Jackson
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU