pwc
[Top] [All Lists]

Re: [pwc] pwc10 and orbitview problem

To: Philips Webcam Linux Driver <>
Subject: Re: [pwc] pwc10 and orbitview problem
From: Kenneth Lavrsen <>
Date: Mon, 11 Jul 2005 08:38:37 +0200
At 23:07 2005-07-10, you wrote:
Thanks Nikolai:

I install the "stpwc" program and the webcam move perfectly!!!, thanks you.

...but when I try to move the camera when I look the video source with
"xawtv" or other program, the sepwc tell me that the vidoe device is
"bussy", and I read something about this "sysfs" in the setpwc homepage but
I don't understend if is posible to move the camera with the videosource
open??

I look in the path /sys/class/video4linux/video0/pan_tilt , but the file
only have the last coordenates of the camera.

ideas???

Thanks
Mauricio

Check out Motion. It will let you view the camera AND allow you to move the Orbit or Sphere camera while doing this.
http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
And you get other nice features like Motion detection.

Kenneth


--
Kenneth Lavrsen,
Glostrup, Denmark

Home Page - http://www.lavrsen.dk

_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU