pwc
[Top] [All Lists]

Re: [pwc] fatal error when modprobing pwc

To: Lonni J Friedman <>
Subject: Re: [pwc] fatal error when modprobing pwc
From: Claudio Ochoa <>
Date: Thu, 07 Jul 2005 17:57:56 +0200
Lonni J Friedman wrote:
On 7/7/05, Claudio Ochoa <> wrote:

Lonni J Friedman wrote:

On 7/7/05, Claudio Ochoa <> wrote:


Hi,

I have FC4 with a 2.6.12-1.1387_FC4 kernel. I downloaded pwc-10.0.7a,
when running make I get some warnings

*** Warning: "usb_altnum_to_altsetting" [/root/pwc-10.0.7a/pwc.ko]
undefined!
*** Warning: "video_device_release" [/root/pwc-10.0.7a/pwc.ko] undefined!
*** Warning: "video_usercopy" [/root/pwc-10.0.7a/pwc.ko] undefined!
...

but in the end compiles. However, when I modprobe pwc I get the
following error

FATAL: Error inserting pwc
(/lib/modules/2.6.12-1.1387_FC4/kernel/drivers/usb/media/pwc.ko):
Invalid module format

I'm trying to upgrade the driver since my Logitech QuickCam Pro 4000
only shows a gray frame (no image at all) when detected by the pwc
driver built into the kernel.

Any ideas?
 Thanks
    Claudio


I'm not seeing anything like that with FC4.  Is this x86 or x86_64 ?

is x86.

#uname -a
Linux xxx.com 2.6.12-1.1387_FC4 #1 Fri Jul 1 12:41:40 EDT 2005 i686 i686
i386 GNU/Linux


And you had the kernel-devel RPM for the 2.6.12-1.1387_FC4 kernel
installed when you built the module?

Yep, installed the kernel-devel and the driver worked perfectly.

Thanks very much!!!!
_______________________________________________
pwc mailing list

http://lists.saillard.org/mailman/listinfo/pwc

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU