Message
Message: 1a.
Subject: Re: Sony PCM M10 Stereo balance
From: "Klas Strandberg" klasstrandberg
Date: Mon Jul 15, 2019 5:47 am ((PDT))
The M10 has a low PIP output. I suspect the microphones are badly
matched, regarding current consumption. Make a external plug in power
device and I am quite sure that the problem disappear.
Klas
On 2019-07-14 13:46, Meena Madhav Haribal
[naturerecordists] wrote:
>
>
> Recently I too have been observing that with Sony PCM10. Right level
> is half that of the left. Also when I plug in headphone there is lot
> of static, I sent to Sony for repairs, the cost was more than the unit
> so I got it back without repairing.
>
>
> Meena
>
>
> Meena Haribal
> Ithaca NY 14850
> 42.429007,-76.47111
>
> http://meenaharibal.blogspot.com/
> Ithaca area moths: https://plus.google.com/118047473426099383469/posts
> Dragonfly book sample pages:
> https://drive.google.com/open?id=3D0B1ngrZelDNo5QnFDMl9BdVNlLXc
> **
>
>
> ------------------------------------------------------------------------
>
> Messages in this topic (11)
> ________________________________________________________________________
> ________________________________________________________________________
> 2. Sony PCM M10 Stereo balance
> Posted by: "Chris Erkal"
> Date: Sat Jul 13, 2019 9:17 am ((PDT))
>
> Hello!
>
> I've got two Sony PCM M10's which I primarily use for connecting a
> pair of omnis into the mic in. From time to time I'd like to use the
> build in microphones, but there seems to be a balancing problem: one
> side is considerably quiter than the other, about 3dB on one of them,
> more than 12 on the other.
>
> Rebalancing the levels afterwards does not always produce a balanced
> result - the imbalance seems to be frequency dependent, so always
> applying the same amount of gain (measured with a central mono source
> under controlled condition) does not produce equivalent results under
> real world conditions.
>
> Is this a common problem with the units? I'd like to understand what's
> causing the behaviour, as the external mics don't have that problem.
> I understand that there is a multitude of possible reasons but maybe
> someone can share similar experiences?
>
> Best,
> Chris Erkal
>
>
>
> Messages in this topic (1)
>
>
>
>
>
>
>
"While a picture is worth a thousand words, a
sound is worth a thousand pictures." R. Murray Schafer via Bernie Krause.
------------------------------------------------------------------------
Yahoo Groups Links
------------------------------------------------------------------------
|