naturerecordists
[Top] [All Lists]

Re: high pass filter on EM172 capsules

Subject: Re: high pass filter on EM172 capsules
From: "Gianni Pavan" gpavan1960
Date: Fri Apr 8, 2016 5:05 am ((PDT))
thanks Ivano for the scheme. However it is too sharp (4th order =3D 24
dB/octave) for my needs. I'd need something smoother, e.g. max 12 dB/oct,
however 6 dB/oct could be enough, and at lower frequency, e.g. below
100-200 Hz.

Gianni



2016-04-08 12:45 GMT+02:00 Ivano Pelicella 
[naturerecordists] <>:

>
>
> Hi Gianni
>
> I've done a 2 operational amplifier circuit design:
> a high pass filter second order with a passband attenuation -3 dB and
> passband frequency 500 hz, 4th order, single power supply
> is it ok for you?
> Here the link to download:
> https://dl.dropboxusercontent.com/u/12325729/high%20pass%20sch.zip
>
> Ivano
>
> 2016-04-08 12:06 GMT+02:00 Gianni Pavan 
> [naturerecordists] <>:
>
>>
>>
>> Hi Dan, thanks, great and simple. I'll do test with both P48 powering an=
d
>> battery powering.
>>
>> For P48 I'd try with SimplestP48. Alternatives ?   (my philosophy is to
>> keep as simple as possible)
>>
>> For usual battery powering which is the simplest circuit design ?
>>
>> Gianni
>>
>> 2016-04-08 6:24 GMT+02:00 Dan Dugan  [naturerecordists] =
<
>> >:
>>
>>>
>>>
>>> A capacitor will do both, roll off the low frequencies and block PIP so
>>> you can use your own supply. The smaller the cap, the higher the rollof=
f
>>> starts. Sensitive to the source and destination impedances, so it=92s a
>>> custom thing. Start with 1uF and see what happens.
>>>
>>> -Dan
>>>
>>> Hi all, EM172 and other capsules with PIP powering are a great resource
>>> for building both specialized and general purpose microphones. I some c=
ases
>>> it would be useful to have a high pass filter to limit low frequency no=
ise,
>>> e.g. generated by breeze or wind.
>>>
>>> I would ask to those more expert than me in electronics if it is
>>> possible to insert a simple HP filter in between the capsule and the
>>> recorder input, eventually also considering to replace the PIP from
>>> recorder with a dedicated battery.
>>>
>>> Gianni Pavan
>>>
>>>
>>>
>>
>>
>> --
>> Centro Interdisciplinare di Bioacustica e Ricerche Ambientali
>> Universit=E0 degli Studi di Pavia
>> Via Taramelli 24, 27100 Pavia
>> http://www.unipv.it/cibra
>> http://mammiferimarini.unipv.it
>>
>>
>
>
> --
> _________________
> www.dodotronic.com
>
>
>



--
Centro Interdisciplinare di Bioacustica e Ricerche Ambientali
Universit=E0 degli Studi di Pavia
Via Taramelli 24, 27100 Pavia
http://www.unipv.it/cibra
http://mammiferimarini.unipv.it





<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU