Hi Dan, thanks, great and simple. I'll do test with both P48 powering and
battery powering.
For P48 I'd try with SimplestP48. Alternatives ? (my philosophy is to
keep as simple as possible)
For usual battery powering which is the simplest circuit design ?
Gianni
2016-04-08 6:24 GMT+02:00 Dan Dugan [naturerecordists] <
>:
>
>
> A capacitor will do both, roll off the low frequencies and block PIP so
> you can use your own supply. The smaller the cap, the higher the rolloff
> starts. Sensitive to the source and destination impedances, so it=92s a
> custom thing. Start with 1uF and see what happens.
>
> -Dan
>
> Hi all, EM172 and other capsules with PIP powering are a great resource
> for building both specialized and general purpose microphones. I some cas=
es
> it would be useful to have a high pass filter to limit low frequency nois=
e,
> e.g. generated by breeze or wind.
>
> I would ask to those more expert than me in electronics if it is possible
> to insert a simple HP filter in between the capsule and the recorder inpu=
t,
> eventually also considering to replace the PIP from recorder with a
> dedicated battery.
>
> Gianni Pavan
>
>
>
>
--
Centro Interdisciplinare di Bioacustica e Ricerche Ambientali
Universit=E0 degli Studi di Pavia
Via Taramelli 24, 27100 Pavia
http://www.unipv.it/cibra
http://mammiferimarini.unipv.it
|