naturerecordists
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: Bat detector calibration

from [raimundspecht] [Permanent Link][Original]
Subject: Re: Bat detector calibration
From: animalsounds
Date: Sun Mar 20, 2016 11:01 am ((PDT)) 
I just noticed that the DPC(SPEED CTRL) switch on the back side of the SONY=
 PCM-M10 must be set to the OFF position. Otherwise, the ultrasounds will b=
e rejected (and distorted).


 Regards,
 Raimund
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: Bat detector calibration, raimundspecht
Next by Date:  Re: Bat detector calibration, Peter Shute
Previous by Thread:  Re: Bat detector calibration, raimundspecht
Next by Thread:  Re: Bat detector calibration, Peter Shute
Indexes:  [Date] [Thread] [Top] [All Lists]
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU