[Top] [All Lists]

Re: Start time for Sony PCM-M10 with memory card

Subject: Re: Start time for Sony PCM-M10 with memory card
From: "Curt Olson" flipov411
Date: Wed Sep 7, 2011 7:09 am ((PDT))
This is normal. It scans all available media when first powered up.  
More media, the more time it takes  to scan.

Curt OIson

Peter Shute wrote:

> I recently tried adding a 4GB memory card to my PCM-M10, and have  
> found that it adds quite a few seconds to the start up time. It  
> seems to check through the memory before it's ready.
> Is this normal, or do I need to format the card or something?
> If it's normal, is the time proportional to the size of the card? If  
> so then I might cancel my plans to get a 16GB card to leave in the  
> machine, and get some 4GBs to keep in case the internal memory fills  
> up instead.
> Peter Shute

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU