naturerecordists
[Top] [All Lists]

Re: Adobe Audition 2 question

Subject: Re: Adobe Audition 2 question
From: "G" gwapuffin
Date: Sat Jun 4, 2011 3:24 pm ((PDT))
I have zoomed in the frequency and selected to the bottom of the screen, th=
en select cut.  The sounds above 200Hz are then removed but the sounds belo=
w 200 Hz are not completely removed.

GW

--- In  "NordicNature" <> =
wrote:
>
> If you just make a small square selection in the middle first no matter w=
here, and then you can grab the lower edge of the square and drag it down t=
o the bottom. Drag the other sides to where you want them. Press delete and=
 it should be gone.
> If you have zoomed in the frequency and that might be the problem if not =
everything get selected, you can right click at the frequency numbers to th=
e right and zoom out or reset the frequency zoom. Make your selection now.
> I'm just taking this out of my memory, so I hope I remembered it right.
> I hope it helpes.
>
>
> --- In  "G" <gwapuffin@> wrote:
> >
> >
> > I have trouble cutting all the lower frequencies when using the marquee=
 selection tool in spectral view.  It looks like I am at the bottom of the =
screen with the selection but it actually leaves the sounds below 200 Hz wh=
en I use the cut command.  I can go back and zoom in to reselect and it gra=
bs more of the sound but still leaves traces of sound.  Is this a normal op=
eration for the program or a shortcoming of my processing power?
> >
> > GW
> >
>








<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU