Zoom H2 Line Inputs

Subject:	Zoom H2 Line Inputs
From:	"Richard L. Hess" richardlhess
Date:	Thu Apr 9, 2009 9:36 am ((PDT))

Hi,

Has anyone determined where the preamp clips in the Zoom H2?

i.e. at what point does reducing the record level further result in 
clipping of the preamp? I know it clips badly at 50 on the record level.

Also, what is the electrical input level for preamp clipping?

Yes, I can test this, but I thought I'd save the hour if someone has 
it at their fingertips.

Cheers,

Richard

Richard L. Hess                   
Aurora, Ontario, Canada       http://www.richardhess.com/
Detailed contact information: http://www.richardhess.com/tape/contact.htm

<Prev in Thread]	Current Thread	[Next in Thread>
Zoom H2 Line Inputs, Richard L. Hess <= Re: Zoom H2 Line Inputs, Curt Olson Re: Zoom H2 Line Inputs, Richard L. Hess Re: Zoom H2 Line Inputs, Curt Olson Re: Zoom H2 Line Inputs, Rob Danielson Re: Zoom H2 Line Inputs, Curt Olson Re: Zoom H2 Line Inputs, Richard L. Hess Re: Zoom H2 Line Inputs, Curt Olson Re: Zoom H2 Line Inputs, Richard L. Hess

Previous by Date:	Re: silence, snow, wind, silence, Bernie Krause
Next by Date:	Re: Cable adapter question - answer, Scott Fraser
Previous by Thread:	silence, snow, wind, silence, Christian Kiefer
Next by Thread:	Re: Zoom H2 Line Inputs, Curt Olson
Indexes:	[Date] [Thread] [Top] [All Lists]

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU