| Subject: | Re: Shure WL183 modified for PIP |
|---|---|
| From: | "Rob Danielson" danielson_audio |
| Date: | Sun Feb 8, 2009 1:04 am ((PST)) |
At 9:01 PM -0800 2/7/09, Dan Dugan wrote: > >No mod needed, except changing the connector--or better yet, making an >adaptor and leaving the original connector, so you can [also] use it with = the >Shure barrel for phantom power. The 183 is a PIP mic! Wiring of the TA4F connectors: http://tinyurl.com/yttu5e or http://www.uwm.edu/~type/audio-reports/Shure-WL183s/images/shure183p-i-pAda= ptercable.jpg -- |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Shure WL183 modified for PIP, John Hartog |
|---|---|
| Next by Date: | Re: Comparative noise levels of xlr + recorder, Roger.Norwood |
| Previous by Thread: | Re: Shure WL183 modified for PIP, John Hartog |
| Next by Thread: | Re: Shure WL183 modified for PIP, Dave A. Anselmi |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU