Dave:
The instructions on Rob's site:
http://www.uwm.edu/~type/audio-reports/Shure-WL183s/images/ShureWR-
183WiringNoTA4M%27s.jpg
are so easy even I could follow them. Plus, all the cutting and soldering =
is done at the end
of the wires far away from the mics.
So don't let concerns about the procedure hold you back.
Steve P
--- In "dave a. anselmi" <> w=
rote:
>
> Hi everyone--
> I'm a lurker who has finally bought an (Oade-modified) PMD620 & is
> looking for a mic.
> I was thinking of the Shure WL183 due to all the accolades you guys/gals=
> have given it, but would need it modified to utilize PIP (right?)
>
> As an old ham operator, I (should) be fearless about the soldering iron,=
> but I can just see myself destroying the mic...
> Thus-- does anybody do these kinds of upgrades?
>
> Correspondingly, do you recommend any other omni lav for the PMD620?
>
> Thanks, & I can't wait!
> /dave a. anselmi
>
> --
> dave a. anselmi
> http://PracticalMysticProductions.com =95 Digital Filmmaking & Post
> "it's got to run on land, & swim under the sea.
> "we're talking $150 of monster here" --Roger Corman
>
=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=
=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97
=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97=97
> http://PracticalMystic.org =95 School of Practical Mysticism
> "Find your Own Truth"
>
|