re-cables and connectors
Fri Dec 7, 2007 4:22 am ((PST))
Thanks Dan and Julian for advice on previous query(I'm in NZ) .I am
going to have a go at making some cables and I have a query to those
using the Canare L4-E5c and L4-E6s. I need to know how you went about
making up 'y'breakouts. Looking at a picture of some commercial
available ones I see it looks like two cables emerge from a 5pin XLR.
My question is are you chaps using other cable with a narrower
diameter than the above mentioned ones or is it the same cable but
using a larger diameter XLR connector (5pin for stereo) to accommodate
the two cables thru the connector.If so what special XLR connectors
are used. Also I was looking to see if Canare made a smaller diameter
cable for mono that could be used for'Y'breakouts.(twin core plus screen).
I am also considering the Neutrik XX series XLR connectors for ease of
availability (the gold pin versions) ....anyone have advice or
experience with these? eg: how good would they be outdoors and
environment? thank you again everyone.
The University of NSW School of Computer and Engineering
takes no responsibility for the contents of this archive. It is purely
a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way.
If you wish to get material removed from the archive or
have other queries about the archive e-mail
Andrew Taylor at this address: