naturerecordists
[Top] [All Lists]

Re: MS Confusion

Subject: Re: MS Confusion
From: "Phil Tyler" macmang4125
Date: Sat Jun 2, 2007 9:34 am ((PDT))
The Maths.

M =3D L+R

S =3D L-R

So to get L and R

50%M (L+R) + 50%S (L-R) =3D 50%L+50%R +50%L-50%R =3D L
50%M (L+R) - 50%S (L-R) =3D 50%L+50%R -50%L+50%R =3D R

I have only ever used the 'mid-side' setting in Audition 1.5 and so far fou=
nd it to be fine.

Hope that helps.

Phil

--- In  "scottsherk27" <> =
wrote:
>
> I can't seem to wrap my head around MS and have uncovered a confusing
> issue.  I have discovered that after decoding my MS recordings (MDA
> plug-in,Voxengo MSED, or Audition) they are 100% out of phase according
> to Audition's Phase Analyzer.  When I invert one channel, they return
> into phase.  Where in my chain would I inadvertently be inverting the
> phasing?  Or does decoded MS always have an inverted phasing?
>
> Thanks,
> Scott
>






<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU