-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Dave:
The instructions at Rob's page are very easy --- I just followed them
and the whole process was very easy --- even for someone lik eme with no
know-how.
You can email me directly if you have any specific questions...
Good luck!
Steve P
Rob Danielson wrote:
> At 5:42 AM +0000 4/18/07, jerkabobber wrote:
>> Hello everybody. Dave here, you've been helping me through getting
>> started on buying equiptment. I think I'm 99% positive that I'm going
>> with the Sony MZ RH1 Hi-MD recorder.
>> Now, about the Mic(s)
>> Just about eveyone who has responded as far as what mic I should start
>> off with, highly reccomended the Shure WL 183's. As I was researching
>> them, I got a little confused... I had no idea up untill now that
>> they're made to plug into a power pack thingy that is unrelated. Then
>> I further researched and found that you have to modify there plugs.
>> So... just to double check, you buy 2 of these mics, chop off the
>> connections that come with it, and solder the pair together into a
>> male stereo jack to plug into the MD recorder. Is this correct?
>> I'm pretty sure I could do that,..
>
> I'm sure you can too.
>
>> But, just in case I don't know
>> how to do that exactly, anyone have any links for wiring diagrams that
>> I can scope out?
>
> http://www.uwm.edu/~type/audio-reports/Shure-WL183s/index.htm
> Rob D.
>
>
>> I don't want to mess this up after I buy them :)
>
>
>
>> Thanks everyone :)
>>
>> Dave
>>
>>
>>
>> "Microphones are not ears,
>> Loudspeakers are not birds,
>> A listening room is not nature."
>> Klas Strandberg
>> Yahoo! Groups Links
>>
>>
>>
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.3 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFGJi70SjpnOSIP6dIRAiyaAKDhrA0OT9yuTvn5mOgiQvyriy/x7wCfdzjS
DTfUdkuGroVLqT+6DmmTmSk=3D
=3DffFW
-----END PGP SIGNATURE-----
|