Posted by: "stoatwizard"
> That's right, only record-pause. Even if you are prepared to do the
> programming to get multiple sessions, powering off is not an option
> with a HiMD as there is no option I have found to switch into record
> mode via the remote control. You'd have to take the deck apart and
> solder onto the front panel switches to do that. If there is an option
> to switch to record from cold using the remote I'd love to know - the
> absence of that is one of Sony's many UI drop-offs with the HiMD
> design. Still, on a cheap deck I'd rather have the design screw-ups in
> the UI than in the mic preamps
The older MD did have record in the remote protocol, though it was not
implemented in the remotes. I wonder if the same is true of HiMD?
There was a froglogger offered that was based on the MZ-RH1, but it's no
longer offered. So there must be some way to do it.
Walt
|