| Subject: | Re: Hi-MD Dynamic Range (was My MZ-RH1 mic in: -122.8 dBu noise floo |
|---|---|
| From: | "Curt Olson" flipov411 |
| Date: | Thu Jan 4, 2007 8:13 am ((PST)) |
Rob Danielson wrote: > ... I've not really done a serious test, but "Low Sens" also seems to > help with the WL183 "bottoming out" on loud, low Hz signals. This > could be compatible with Curt's theory that the mic pre circuit is > "faulty" -- but--- possibly only when the recorder is in the less > appropriate, "Hi Sens" setting. Not exactly. I was able to easily "bottom out" the Hi-MD with a signal coming in the line input jack. Curt Olson |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: New EM23, Klas Strandberg |
|---|---|
| Next by Date: | Re: "Rustlin' Jack" Hines - Introduction, Suzanne Williams |
| Previous by Thread: | Re: Hi-MD Dynamic Range (was My MZ-RH1 mic in: -122.8 dBu noise floo, Bruce Wilson |
| Next by Thread: | Tascam HD-P2 gain (was My MZ-RH1 mic in: -122.8 dBu noise floor, Rob Danielson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU