Subject: | Re: [gear] Tascam HD-P2 field recorder |
---|---|
From: | "Lou Judson" inaudio |
Date: | Sat Nov 25, 2006 11:37 pm ((PST)) |
Right, it is gain not input level. They do spec that it is to reach -20 dBFS so the math could be done... They do not skimp on the specs if you haven't seen them... Lou Judson =95 Intuitive Audio 415-883-2689 On Nov 25, 2006, at 11:06 PM, Raimund Specht wrote: > Yes, this is probably the dBu figure. However, the absolute input > level specification should be a negative number (for instance -70dBu) > because it is a voltage level referenced to 0.775 Vrms. Care should be > taken when comparing the specifications provided by the various > manufacturers. They often use different (and unusual) definitions for > their figures, which means that we cannot always trust them. > > Raimund > |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [gear] Tascam HD-P2 field recorder, Raimund Specht |
---|---|
Next by Date: | Re: [gear] Tascam HD-P2 field recorder, Raimund Specht |
Previous by Thread: | Re: [gear] Tascam HD-P2 field recorder, Raimund Specht |
Next by Thread: | Re: [gear] Tascam HD-P2 field recorder, Raimund Specht |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU