naturerecordists
[Top] [All Lists]

Re: [gear] Tascam HD-P2 field recorder

Subject: Re: [gear] Tascam HD-P2 field recorder
From: "Rob Danielson" danielson_rob
Date: Sat Nov 25, 2006 1:54 pm ((PST))
At 9:03 PM +0000 11/25/06, Raimund Specht wrote:
>Hi Gianni,
>
>I tested the TASCAM HD-P2 some time ago. The frequency response of
>it's A/D section is very similar to the SoundDevices 722 recorder:
>http://www.avisoft.com/scratch/alias_HD-P2.gif
>
>So, the poor 0.5/-20dB figure in the specifications is obviously
>related to the overall (A/D and D/A) response.=A0=A0
>
>In my experience, the relatively low maximum microphone gain is good
>enough for sensivive microphones (25...50 mV/Pa).

Hi Raimund--
Stated this way, the lower pre gain seems like it
could be fairly limiting for some recordists. I
thought you had estimated about 6dB less gain
from the HD-P2's pre compared to the 722. Would
you estimate it as lower now?  Rob D.







<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU