[Top] [All Lists]

Re: 722 date problems

Subject: Re: 722 date problems
From: "Bruce Wilson" bruceumba
Date: Mon Oct 30, 2006 9:47 am (PST)
The 7xx series needs a hardware update to use the firewire port for externa=
recording. If you don't have a sticker on your unit announcing "v2.0
compatible" then you need the hardware update for full v2.0 functionality.

Bruce Wilson
-----Original Message-----
 On Behalf Of thxdave
Sent: Monday, October 30, 2006 10:36 AM
Subject: [Nature Recordists] Re: 722 date problems

--- In  Po-Jen Chiang
<> wrote:
> I sent back to update to firmware 2.0 also. I also thought that the
> external battery will charge the clock battery and remembered that the
> manual said so. So I keep the external battery attached for over 1 day
> but the 744t still ask me to reset time/date even though SD has replaced
> a new clock battery and I "charged" it over 1 day. It won't ask me to
> reset if I turn off and turn on right away. But if I turn off and turn
> on after 10 minutes, it will ask me to reset time. I hope to hear back
> from SD before next weekend.
> So, do you solve your 722 reset time issue after replacing a new clock
> battery?
> Po-Jen

Sorry for being so dense, but what was the reason for sending the 722
back to SD re: firmware. I updated my 722 to v2.03 but I'm wondering
what I am missing.


"Microphones are not ears,
Loudspeakers are not birds,
A listening room is not nature."
Klas Strandberg
Yahoo! Groups Links

<Prev in Thread] Current Thread [Next in Thread>

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU