naturerecordists
[Top] [All Lists]

Re: (gear) Zeppelin shape

Subject: Re: (gear) Zeppelin shape
From: "1GDW" 1GDW
Date: Wed Aug 2, 2006 11:23 am (PDT)
--- In  Walter Knapp <>
wrote:

> The original zeppelins were made out of painted fabric mesh. Like
that
> of older onion sacks but larger mesh.

Walt and others,
Thank you for your comments about Zeppelin construction.
I am thinking that I want a shell that is more durable than painted
cotton, I would have this in storage in the van for long periods of
time.  If you recall I am only fitting one ME-66 in the blimp and I
wonder if the construction material on the sides and rear could be
different from the nose.  I am thinking about using the relatively
stiff mesh wire used in office wastebaskets for the sides and rear.
The nose of the blimp would be a larger mesh to give me a better
ratio of open space in the pickup cone of the mic.  Would that cause
echoes within the enclosure?  If not, it may increase the
attenuation of sound from the side and rear because of the
percentage of frame material.
Gerald White  Muscatine,IA








<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU