Debbi B wrote:
> ...I've ordered a Rode NT-1A to use with my Sony MZ-NH1...
Mic cable: xlr female --- xlr male
The Rode NT-A1 has an XLR male connector.
So the mic cable needs an XLR female connector here.
The Rolls PB224 has an XLR female connector for
input, so the mic cable needs XLR male to connect.
Minidisc cable: two xlr female --- 3.5mm TRS miniplug
The PB224 has XLR male connectors for output, so the
cable needs XLR female.
The minidisc has a 3.5mm (1/4") tip-ring-sleeve mini jack
so you'll need a 3.5mm minijack on the cable.
If you're recording with two mics, you'll need a cable
that has two XLR female ends for the PB224, connecting
to one 3.5mm TRS miniplug.
Here's an example
http://www.audiogear.com/cgi-bin/shopper.cgi?key=3DAdptMniSP2Fxlr&preadd=3D=
action
--oryoki
________________________________________________________________________
________________________________________________________________________
|