Sorry, maybe I was not clear. The changes I stated are for
configuration of Audition 1.5.
If you want the edirol device to be the primary playback device in
windows media or other wma devices then: Click "start", "control
panel", "sounds and audio devices", tab on "audio" and choose the
edirol for the default device for both playback and record.
I also recommend that you click the "sounds" tab and select "no sounds".
Rich
--- In "Rich Peet" <>
wrote:
> Click "options", then "device properties", then in both the "Wave in"
> and Wave out" tabs pull down to select your Edirol device and check
> the "use this device in edit view" box. You now should be ok.
>
> Rich
>
> --- In "1GDW" <> wrote:
> > I have a new computer and it has an onboard sound card. The onboard
> > card works ok but I also have a new device for the A/D from my mini
> > disk. The device is an Edirol USB audio interface model UA-1X. I
> > am trying this unit for the first time and can not transfer any
> > sound from my minidisk or hear sound from my computer.
> > The Computer is XP OS and I have plenty of horse power .
> > The CODEC files are loaded and I have the playback and record set
> > to CODEC in the sounds and Audio devices window. I have volume
> > controls for the playback showing but no controls for record.
> > The UA-1X powers up and I can hear the sound from the minidisk with
> > headphones plugged into the UA-1X, If I play a sound with the
> > computer it plays back through the onboard sound card. I am using
> > Audition 1.5 to record and playback.
> >
> > The USB device manual says that the sound card will be disabled when
> > the USB is plugged in.
> >
> > Any suggestions?
> >
> >
> > Gerald White Muscatine IA
________________________________________________________________________
________________________________________________________________________
|