Click "options", then "device properties", then in both the "Wave in"
and Wave out" tabs pull down to select your Edirol device and check
the "use this device in edit view" box. You now should be ok.
Rich
--- In "1GDW" <> wrote:
> I have a new computer and it has an onboard sound card. The onboard
> card works ok but I also have a new device for the A/D from my mini
> disk. The device is an Edirol USB audio interface model UA-1X. I
> am trying this unit for the first time and can not transfer any
> sound from my minidisk or hear sound from my computer.
> The Computer is XP OS and I have plenty of horse power .
> The CODEC files are loaded and I have the playback and record set
> to CODEC in the sounds and Audio devices window. I have volume
> controls for the playback showing but no controls for record.
> The UA-1X powers up and I can hear the sound from the minidisk with
> headphones plugged into the UA-1X, If I play a sound with the
> computer it plays back through the onboard sound card. I am using
> Audition 1.5 to record and playback.
>
> The USB device manual says that the sound card will be disabled when
> the USB is plugged in.
>
> Any suggestions?
>
>
> Gerald White Muscatine IA
________________________________________________________________________
________________________________________________________________________
|