Subject: | Re: PIP Mics Booster Pres Test |
---|---|
From: | "John Hartog" <> |
Date: | Sat, 16 Apr 2005 19:35:49 -0000 |
> >I find it interesting that the 183 test with the lower mic pre gain > >and higher post gain reveals more noise than same test with > >higher mic pre and lower post gain > > The recording made with MD record level set at "23" and boosted 10dB > in post ended up with about 1.5 dB less volume than the recording > made at Level "18" and boosted 15dB. It could be that you're > interpreting this lower volume as less noise. I added 1.5dB gain to > the softer one and I could not distinguish them in an A-B test. > There seems to be pretty much the same amount of noise in both of > these files. Ok - thanks Rob. JH ________________________________________________________________________ ________________________________________________________________________ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: need help to position X-Y mics, Dave |
---|---|
Next by Date: | Re: need help to position X-Y mics, ebenj |
Previous by Thread: | Re: PIP Mics Booster Pres Test, Rob Danielson |
Next by Thread: | help/advice needed on mk2 DIY windshield, Chris Butterfield |
Indexes: | [Date] [Thread] [Top] [All Lists] |
The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU