naturerecordists
[Top] [All Lists]

Re: parabolic T mic and phase invert noise reduction

Subject: Re: parabolic T mic and phase invert noise reduction
From: Walter Knapp <>
Date: Sat, 01 Jan 2005 20:03:59 -0500
From: "John Hartog" <>

> 
> Thanks Rich, for your picture of your mic configuration and
> the audio clip. I find your method of noise reduction
> interesting.  
> Here's a picture of how my Shure WL183s are currently 
> mounted:

In both Rich's and this example there is a barrier between the mics (the 
support tube) such that the mic's may not "see" the whole dish. Since 
the tubes are large relative to mic size I'd assume they have some 
effect. Has this effect been calculated or measured?

Walt




________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU