Re: My Audio Buddy problem.

[Rob Danielson <>]

At 3:33 PM -0700 8/25/04, Dan Dugan wrote:
>Rob Danielson wrote:
>
>>The phantom voltage provided was low, ~40 volts.
>
>That, in itself, isn't a problem. Most phantom mics work fine down to
>12V or even lower. Not all.
>
>-Dan Dugan
>

The Audio Buddy's phantom power is borderline for my mbho's even
running on their wall wart.  I suspect more current than provided by
the 4- 9volts would help. The CAD 179's won't go on them. I bought a
bunch of 2/3's size AA's nimh batteries to run +22 and -22 to the
rails, but I haven't had a chance to try this.  Rob D.




________________________________________________________________________
________________________________________________________________________