naturerecordists
[Top] [All Lists]

RE: Digest Number 1188

Subject: RE: Digest Number 1188
From: "Toby Paddock" <>
Date: Fri, 5 Dec 2003 20:24:43 -0800
If it's 1/4-20 female to 3/8-16 male you could use a generic 
threaded insert.
Search on "keensert". Such as...
http://www.imperialinc.com/items.asp?item=0072020
The locking tangs pull out easy.

If you're in the US, I could send you a couple if you
give me your address off-list.

Later,
Toby Paddock

Robin Barber wrote:
>Howdy:
>I vaguely remember reading that someone had found a place to get an
adaptor
>that will connect a standard camera tripod to the fitting found on mic
>stands. I looked through the archive, but didn't seem to locate any
info.
>Perhaps I read it somewhere else. Does anyone have any ideas on this?
I'm
>trying to set up my equipment for a trip to Hawaii in January.
>Thanks.




________________________________________________________________________
________________________________________________________________________

<Prev in Thread] Current Thread [Next in Thread>
Admin

The University of NSW School of Computer and Engineering takes no responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the naturerecordists mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU