Hi,
I'm working on the TS-7553, but it should be the same.
I'm running Fedora on VirtualBox, but it's all the same.
There might be a few silly different problems, so try simplifying your
connection.
I recommend first to try the TS-9445 with your host. My host is Win7 and I use
Putty.
Another option, just to 'talk' with your TS, is via telnet.
Again, you can use Putty from your host, or via "telnet 192.168.0.50" directly
from your Debian console. You'll need to connect your TS to your PC via
Ethernet and change your PC IP, statically to 192.168.0.51 (the default TS-7553
IP is 192.168.0.50, check regarding the 7350).
--- In "ali" <> wrote:
>
> I have just bought TS-7350 and followed the manual to connect it with PC.
> I have virtualbox having Debian.
> What exactly i m doing is that i have connected the TS-9445 with TS-7350
> using JTAG header. Moreover i have connected the console 10 pin header of
> TS-9445 with USB to serial Converter and this converter is going to USB of PC.
> when i configure minicom with the configuration as described in the manual,
> all i get is that "TERMINAL READY" and nothing else is displayed.
> The manual says that booting messages will be displayed after 1.24 seconds
> but i am getting nothing.
>
> Is there any mistake in my procedure?
> it would be really helpful if someone would provide the video tutorial of
> connecting it with PC
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|