[ts-7000] Re: RS-485 full duplex sending and not recieving

["Harold" <>]

That seems like your board does not support RS-485. Did you order it with 
OP-485-FD? Is bit 1 at location 0x22400000 set, to indicate the COM2 RS-485 
option is present?


--- In  "khouryelie"  wrote:
>
> Last thing
> 
> even after i switch to 485 full duplex i can still send and recieve on pin 2 
> and 3 which are rx and tx for rs 232 communication
> 
> is that normal ?
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/