[ts-7000] Re: RS-485 full duplex sending and not recieving

["khouryelie" <>]

in the manual for ts 7200 we have

COM2 will default to RS-232 mode at reset (COM2 mode register = Hex 00). In 
order to
switch COM2 into Full duplex RS-485 mode, the COM2 Mode register at 0x22C0_0000
must be set to Hex 01. In this mode, the TX drivers are always asserted.

so i do that i put hex 01
i get system message saying : "setting full duplex"

but what does this mean "the TX drivers are always asserted".
maybe that's why i am not able to recieve ?





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/