[ts-7000] TS-7200 stuck

["khouryelie" <>]

hello i am trying to use my COM2 port on the TS 7200 in RS-485 Full duplex mode


from the manuel
"COM2 will default to RS-232 mode at reset (COM2 mode register = Hex 00). In 
order to
switch COM2 into Full duplex RS-485 mode, the COM2 Mode register at 0x22C0_0000
must be set to Hex 01. In this mode, the TX drivers are always asserted."

so apparently i have to change the mode register to hex 01 at physical address 
0x22C0_0000

can someone help me an tell me how can i do that ?

'''''''''''''''''''''''''''
i had already had a topic about this and got nowhere

http://tech.groups.yahoo.com/group/ts-7000/message/22226
'''''''''''''''''''''''''''

thanks in advance



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/