[ts-7000] Re: TS-7200 stuck

["Harold" <>]

peekpoke 8 0x22C00000 1

or

http://wiki.embeddedarm.com/wiki/Linux_for_ARM_on_TS-72XX_User%27s_Guide#RS-485_Support_on_COM2


--- In  "khouryelie"  wrote:
>
> hello i am trying to use my COM2 port on the TS 7200 in RS-485 Full duplex 
> mode
> 
> 
> from the manuel
> "COM2 will default to RS-232 mode at reset (COM2 mode register = Hex 00). In 
> order to
> switch COM2 into Full duplex RS-485 mode, the COM2 Mode register at 
> 0x22C0_0000
> must be set to Hex 01. In this mode, the TX drivers are always asserted."
> 
> so apparently i have to change the mode register to hex 01 at physical 
> address 0x22C0_0000
> 
> can someone help me an tell me how can i do that ?
> 
> '''''''''''''''''''''''''''
> i had already had a topic about this and got nowhere
> 
> http://tech.groups.yahoo.com/group/ts-7000/message/22226
> '''''''''''''''''''''''''''
> 
> thanks in advance
>




------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/