| To: | |
|---|---|
| Subject: | Re: [ts-7000] Mount TS7200 CF card |
| From: | Yan Seiner <> |
| Date: | Mon, 14 Jan 2013 19:57:18 -0800 |
Yan Seiner wrote:
> Joseph Bouchard wrote:
>
>> What device is sda2? If it is a USB drive, you probably need the USB
>> mass storage module too.
>>
>> If you are booting from the CF card I think you want root=/dev//hda1/
>>
>>
>
> The 2.6 kernel boots off of /dev/sdaX
>
HAH! I grafted the 2.6.34 patches into the 3.3.8 kernel tree, and it
booted just fine.
:-)
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Mount TS7200 CF card, Yan Seiner |
|---|---|
| Next by Date: | [ts-7000] how to boot from CF card on TS 7200, khouryelie |
| Previous by Thread: | Re: [ts-7000] Mount TS7200 CF card, Yan Seiner |
| Next by Thread: | [ts-7000] how to boot from CF card on TS 7200, khouryelie |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU