ts-7000
[Top] [All Lists]

Re: [ts-7000] Mount TS7200 CF card

To:
Subject: Re: [ts-7000] Mount TS7200 CF card
From: Yan Seiner <>
Date: Mon, 14 Jan 2013 19:36:19 -0800
Joseph Bouchard wrote:
>
> What device is sda2? If it is a USB drive, you probably need the USB 
> mass storage module too.
>
> If you are booting from the CF card I think you want root=/dev//hda1/
>

The 2.6 kernel boots off of /dev/sdaX

scsi0 : pata_ts72xx
ata1: PATA max PIO4 mmio cmd 0x11000000 ctl 0x10400006 irq 32
ata1.00: CFA: TOSHIBA THNCF1G02QG, 3.00, max PIO4
ata1.00: 2000880 sectors, multi 1: LBA
ata1.00: configured for PIO
ata1.00: configured for PIO
ata1: EH complete
scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNCF1G0 3.00 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 2000880 512-byte hardware sectors: (1.02 GB/976 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't 
support DPO or FUA
sd 0:0:0:0: [sda] 2000880 512-byte hardware sectors: (1.02 GB/976 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't 
support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0

The 3.3.x series seems to be lacking pata_ts72xx driver... (?)


>
> On 01/14/2013 09:09 PM, Yan Seiner wrote:
>> I'm trying to boot off the CF card on a 7200 with a recent (3.3.8) kernel.
>>
>> I get a kernel panic:
>>
>> [    2.160000] VFS: Cannot open root device "sda2" or unknown-block(0,0)
>> [    2.170000] Please append a correct "root=" boot option; here are the 
>> available partitions:
>> [    2.170000] 1f00            8192 mtdblock0  (driver?)
>> [    2.190000] Kernel panic - not syncing: VFS: Unable to mount root fs 
>> on unknown-block(0,0)
>>
>> I've turned on all the scsi and ata stuff I can find:
>>
>> CONFIG_SCSI_MOD=y
>> CONFIG_SCSI=y
>> CONFIG_SCSI_DMA=y
>> CONFIG_SCSI_PROC_FS=y
>> CONFIG_BLK_DEV_SD=y
>> CONFIG_CHR_DEV_SG=y
>> CONFIG_SCSI_MULTI_LUN=y
>> CONFIG_SCSI_WAIT_SCAN=m
>> CONFIG_SCSI_LOWLEVEL=y
>> CONFIG_ATA=y
>> CONFIG_SATA_AHCI_PLATFORM=y
>> CONFIG_ATA_SFF=y
>> CONFIG_ATA_BMDMA=y
>> CONFIG_PATA_PLATFORM=y
>>
>>
>> What am I missing?  I'm coming back to TS72xx development, and I'm 
>> really rusty....
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>     
>
> 
> !DSPAM:50f4c8d8319441974612876! 


-- 
Help us raise money for my kids' swim team!

http://www.facebook.com/RiverRoadKids4Kids



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU