Thanks Alex,
Just tried it out and it worked fine!
Will try to resize partition 4 later on.
Thanks,
George
--- In Alex McLain <> wrote:
>
> Wait, I lied. This is the image I use:
>
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7500-linux/binaries/ts-images/2gbsd-noeclipse-latest.dd.bz2
>
> -Alex
>
> On Wed, Jul 18, 2012 at 6:52 PM, Alex McLain <> wrote:
>
> > Yes, the TS7500 has an SDHC card slot so a 4GB card will be fine. I have
> > used 2 gig and 8 gig cards in my TS7500 boards. The card has to be set up
> > correctly to work with the board's bootloader, so the easiest way to get up
> > and running is to download the .dd image from the FTP site (
> > ftp://ftp.embeddedarm.com/images/ts7500/sdimg-ts7500.dd) and use the
> > Linux dd command to copy the image from the file to the SD card. From
> > there you can use fdisk and resize2fs to expand partition 4 to the end of
> > the free space. Otherwise your 4 gig card will be limited to 2 gigs. If
> > you receive strange errors, try running badblocks to make sure the card
> > doesn't have bad sectors.
> >
> > -Alex
> >
> >
> > On Wed, Jul 18, 2012 at 5:15 AM, grgeng83 <> wrote:
> >
> >> **
> >>
> >>
> >> Hi,
> >>
> >> I have a TS7500 board but didn't buy the microSD card and am trying to
> >> use my own microSD card. I cannot manage to get it working properly.
> >>
> >> I am trying to use a 4GB microSD card whereas the one that comes with the
> >> board is 2GB. Can the TS7500 handle a 4GB SD card ?
> >>
> >> I've even formatted the SD card with a 2GB partition and tried to mount
> >> it but I get an Input/Output error.
> >>
> >> Looking through the dmesg output on the TS7500 when trying to mount the
> >> SD card there are "unable to read superblock" errors.
> >>
> >> any ideas?
> >>
> >> Thanks,
> >> George
> >>
> >>
> >>
> >
> >
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|