Isn't it their ts700ctl or similar?
Never bothered because I'd written my own - cctl
You can down load it frommy website.
Jim
----------------------------------------------------------------------------
HomePage: http://www.comp.leeds.ac.uk/jj
TS7200 Page: http://www.comp.leeds.ac.uk/jj/linux/arm-sbc.html
On Wed, 30 May 2012, Don Tucker wrote:
> Thanks, Jim. I may end up doing just that.
>
> There is a reference in section 1.3 of the TS-7260 manual:
>
> "Note: This board includes software power control for on board peripherals to
> minimize power consumption (as low as ? Watt) for use in power sensitive
> designs ? ideal for battery-powered applications."
>
> Does anyone know to what software this is referring?
>
> Don
>
> On 5/30/2012 10:32 AM, Jim Jackson wrote:
> > Other than doing things like turning off the ethernet phy, and
> > underclocking the processor etc, no.
> >
> > On Tue, 29 May 2012, Don Tucker wrote:
> >
> > > I looked through the manual for information regarding power management of
> > > this
> > > SBC and saw only the ability to perform board resets and shutdowns via
> > > DIO2.
> > > Is anyone aware of a way to put the board into (and out of) a low-power
> > > state?
> > >
> > > Don
> > >
> > >
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|