|
You can use this script : ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7260-linux/binaries/ts-scripts/ts7xxx.subr You can shut down the ethernet port , change the microcontroller frequency , all the good stuff. From: Don Tucker <> To: Sent: Wednesday, May 30, 2012 12:29 PM Subject: Re: [ts-7000] sleep mode for TS-7260? Thanks, Jim. I may end up doing just that. There is a reference in section 1.3 of the TS-7260 manual: "Note: This board includes software power control for on board peripherals to minimize power consumption (as low as ½ Watt) for use in power sensitive designs – ideal for battery-powered applications." Does anyone know to what software this is referring? Don On 5/30/2012 10:32 AM, Jim Jackson wrote: > Other than doing things like turning off the ethernet phy, and > underclocking the processor etc, no. > > On Tue, 29 May 2012, Don Tucker wrote: > >> I looked through the manual for information regarding power management of this >> SBC and saw only the ability to perform board resets and shutdowns via DIO2. >> Is anyone aware of a way to put the board into (and out of) a low-power state? >> >> Don >> >> __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |