| To: | |
|---|---|
| Subject: | [ts-7000] TS7800 ADC |
| From: | "vidhyaverma88" <> |
| Date: | Tue, 13 Mar 2012 15:09:52 -0000 |
Hello ,
I just started using the ts7800 board & I need ADC output on GPIO
or on DIO pins , no tutorials regarding this is available so can anybody help
me how to start writing the code or configure ADC so that I can get 4 channel
output on GPIO or DIO pins .
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] TS-7250 and redboot / TS bootloader, larrylizard67 |
|---|---|
| Next by Date: | Re: [ts-7000] TS7800 ADC, Mark Featherston |
| Previous by Thread: | [ts-7000] TS-7250 and redboot / TS bootloader, larrylizard67 |
| Next by Thread: | Re: [ts-7000] TS7800 ADC, Mark Featherston |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU