Re: [ts-7000] TS7800 ADC

[Mark Featherston <>]

The TS-7800 does not have hardware for analog outputs.  You would have to use a daughterboard such as the TS-9700 which has optional 0-5V 12bit DAC hardware when ordered with "OP-DAC4".

http://www.embeddedarm.com/products/board-detail.php?product=TS-9700

If you're referring to the ADC inputs you can find more details here:

http://www.embeddedarm.com/wiki/index.php/TS-7800#ADC_Sampling

Best Regards, 

________________________________________________________________

 Mark Featherston, Technologic Systems | voice: (480) 837-5200

 16525 East Laser Drive                | fax: (480) 837-5300

 Fountain Hills, AZ 85268              | web: www.embeddedARM.com 

On Mar 13, 2012, at 8:09 AM, vidhyaverma88 wrote:

 

Hello ,
I just started using the ts7800 board & I need ADC output on GPIO or on DIO pins , no tutorials regarding this is available so can anybody help me how to start writing the code or configure ADC so that I can get 4 channel output on GPIO or DIO pins .

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___