|
Hi Don! I followed your instructions. After completing step 15, restart the ts7260 board, but the system does not boot. Only the following message appears repeatedly: >> TS-SDBOOT - built Aug 10 2009 >> Copyright (c) 2007, Technologic Systems >> TS-SDBOOT - built Aug 10 2009 >> Copyright (c) 2007, Technologic Systems >> TS-SDBOOT - built Aug 10 2009 >> Copyright (c) 2007, Technologic Systems Is there any way to
recover the boot? Ricardo De: Don Tucker <> Para: Enviado: lunes, 30 de enero de 2012 14:14 Asunto: Re: [ts-7000] Boot debian on sd card NOTE: The following procedure is IRREVERSIBLE. 1.Download the tsbootrom-update from ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7200-linux/binaries/ts-utils/tsbootrom-update and put it onto a USB flash drive. 2.Boot into a stock TS-7260 using the development interface. Type 'root' to log in. 3.run /usr/bin/loadUSBModules.sh 4.Plug in the USB flash drive and you will see a message indicating where it is mounted (e.g. /dev/scsi/host0/bus0/target0/lun0/part1 ). 5.Type mount /dev/scsi/host0/bus0/target0/lun0/part1 /mnt . This will mount the device at /mnt . 6.Copy tsbootrom-update from the /mnt directory over onto the /root directory. 7.Return to /root and type umount /dev/scsi/host0/bus0/target0/lun0/part1 to unmount the device. THIS MUST BE DONE or you risk corrupting the file system (if there is one) on the USB device upon power down or removal. 8.Type mac=`ifconfig eth0 | grep HWaddr | cut -d' ' -f11` 9.Then type tsbootrom-update -s -m $mac NOTE: If this is not done you will lose your MAC address forever. 10.Place the SD card into the TS-7260 SD card slot and reboot the TS-7260. 11.You should boot into the fastboot shell after a few seconds. From within the shell, type the following: 12.ln -sf /linuxrc-sdroot /linuxrc 13.sync 14.save 15.reboot This should boot the TS7260 to a login prompt on the Debian file system of the SD card. You may have to try creating this link a few times before it actually saves. 16.See this link (http://www.embeddedarm.com/software/arm-linux-fastboot-ts7300.php) for more information. Don On 1/30/2012 11:02 AM, ricardogabriel5 wrote: > > Hi! > > I have a TS7260 board and sd card with debian linux. > > The sd card has 3 partitions: > > The second and thrid partitions have files. But the first partition is empty with an unknown format > > What steps should I follow to make the board boot from sd card? > > Regards, > > Ricardo > > __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |