[ts-7000] decode the can message and package can message by TS-CAN1

["zhangjing80" <>]

hello,everyone:
I'm a beginner in the Embedded Linux. Now I have installed the TS-CAN1 board on 
the TS-7300. I can also test the board with ./readcan /dev/can0 and 
./sendburst. But I have some questions about the concrete usage of the TS-CAN1.
1. If I use the ./readcan, I can read the can message from the can bus and 
should get the can data(8 bytes), how can I decode the can frame?Where do these 
data store, or how can I get them, because I wanna thansfer them to the EP9302.
2. If I wanna send some data back to the CAN bus with fixed ID e.g. 302H. How 
can I realize the package of the can frame?

Need I write any programms manually?

Thank you~~





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/