Re: [ts-7000] Using TS-7500 SBC to collect and transfer camera data over TCP/IP

[Mike Travis <>]

We actually use 3 ccd sensor blocks that digitize infrared emitting LEDs. Based on the strength and perceived position of the IR image we calculate to high accuracy a point in 3 dimensional space. The sensor block camera array is a system we've ha for years, were now trying to incorporate the SBC into the camera array. 

I just wanted to know if anyone had used 8 DIO pins to input 8 bits of data at 25 MHz before. 

Mike

On Jul 28, 2011, at 5:27 PM, walter marvin <> wrote:

 

why a ccd? why not use an ip camera? Then its an easy problem

---

From: mtrav100 <>
To: m("yahoogroups.com","ts-7000");">m("yahoogroups.com","ts-7000");">
Sent: Thursday, July 28, 2011 6:40 PM
Subject: [ts-7000] Using TS-7500 SBC to collect and transfer camera data over TCP/IP

 

Hello,

I ordered a TS-7500 today and expect to receive it some time next week.

I'm looking to collect 8-bits of data at 25MHz (from 3 CCD sensor blocks daisy-chained) and transfer them to a computer over TCP/IP. I was planning on using the DIO pins on the expansion header to collect the data and maybe use a .C or .CPP routine to transfer the data to the computer.

I was wondering if anyone has done anything like this before and could maybe steer me in the right direction before I get the actual board and begin experimenting with it.

Thanks!
Mike

__._,_.___

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___