[ts-7000] Using TS-7500 SBC to collect and transfer camera data over TCP/IP

["mtrav100" <>]

Hello,

I ordered a TS-7500 today and expect to receive it some time next week.  

I'm looking to collect 8-bits of data at 25MHz (from 3 CCD sensor blocks 
daisy-chained) and transfer them to a computer over TCP/IP.  I was planning on 
using the DIO pins on the expansion header to collect the data and maybe use a 
.C or .CPP routine to transfer the data to the computer.

I was wondering if anyone has done anything like this before and could maybe 
steer me in the right direction before I get the actual board and begin 
experimenting with it.

Thanks!
Mike



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/