|
Try using modprobe: # Cargamos el modulo modprobe rt73 # levantamos la interfaz ifconfig rausb0 up # Se crea la configuracion para la red (Solo una vez) /mnt/root/usr/local/bin/wpa_passphrase essid password > /etc/wpa_supplicant_custom.conf # Conectar con router /mnt/root/usr/local/bin/wpa_supplicant -irausb0 -Dralink -c/etc/wpa_supplicant_custom.conf -B # Obtener ip por dhcp udhcpc --interface=rausb0 #
Probar conectividad ping 192.168.1.1 Regards, Javier De: burnsmicro <> Para: Enviado: miércoles, 20 de julio de 2011 2:08 Asunto: [ts-7000] How to connect to the TS-WiFiBox-2? Help. I am having a devil of a time getting the WiFi up on the TS-WiFiBox-2.
I must be missing some key element in the "WIFI-G-USB-2 Manual". In following this manual, I first confirmed the WiFi driver has not been installed (# cat /proc/net/wireless). Then I downloaded and expanded wifi-g-usb-2_rt2501usb-binaries.tar.gz and copied ...\rt2501usb\binaries\linux26\rt73_ts7500.ko from my PC to /lib/modules/2.6.24.4/kernel/net/wireless/, for lack of a better location, on the board. The instructions just say "download to the board". After running: ts7500:/# insmod /lib/modules/2.6.24.4/kernel/net/wireless/rt73_ts7500.ko ..and "rausb0" showed up (# cat /proc/net/wireless). Next I attempted to set up a "WPA Personal – TKIP" connection: ts7500:/# ifconfig rausb0 up ts7500:/# ifconfig ..and the board hung. On restarting the board and booting Debian, there was no trace of the WiFi driver (# cat /proc/net/wireless). Help. What am I missing? Thanks, RF __._,_.___
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe __,_._,___ |