[ts-7000] Re: Problem with kernel 2.6.34 on ts-7800

["Jaan" <>]

Hi,

You don't need to change the head.S to get a working 2.6.34-ts kernel. This 
hint was for kernel.org kernels.

My next question would be, what command do you use to load the kernel to your 
SD card?

For example, I would use "dd if=arch/arm/boot/zImage of=/dev/sdc2" where 
/dev/sdc is my SD card device and sdc2 is the 2nd partition of the SD card.

If still no success, I could try to load your zImage to my own TS-7800, or 
compile a suitable kernel to you with your .config file.

Jaan



------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/