Hi,
My guess would be that you have no parameters set in make menuconfig -> boot
options -> default kernel command string. To see why it just hangs, add
console=ttyS0,115200n8 to the line. TS kernel default is console=none and then
you don't see the kernel panic message.
An alternative would be to use a kernel.org kernel with make
orion5x_defconfig... There are several messages in this Yahoo! group describing
the process of compiling a kernel.org kernel, but it is not easy when you have
little experience. As a starting point, you can look at message no 20289 in
this Yahoo! group.
Jaan
--- In "bdinc2001" <> wrote:
>
> Hi,
>
> I am working on ts-7800 and would like to use kernel 2.6.23 or later.
> For this purpose I have tried to compile the kernel from
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7800-linux/sources/2.6.34.tar.gz
> and as tool-chain, I have used
> ftp://ftp.embeddedarm.com/ts-arm-sbc/ts-7800-linux/cross-toolchains/ts7800-crosstool-linux-gnueabi-2008q3-2.tar.gz,
>
> but it does not work.
> During the boot
>
> "Uncompressing Linux... done, booting the kernel."
>
> then it stuck,
>
> Does Kernel 2.6.34 from embeddedarm.com work with ts-7800 embedded sbc?
> If not, how can I work Kernel 2.6.34 on ts-7800?
>
> Thanks for any kind of help.
>
> Bolat
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|