Hi, all
I just received a TS-7260 with TS-GSM1 + WaveCOM Q64 GSM modem onboard. To have
a quick test of the Q64 modem, I setup the TS-GSM1 to use COM2 (by shorting JP1
on TS-GSM1, with the rest of the jumpers as factory default). I then tried
accessing COM2 using picocom. The output is shown below:
-----------------------------------
$ ./picocom /dev/ttyAM1
picocom v1.6
port is : /dev/ttyAM1
flowcontrol : none
baudrate is : 9600
parity is : none
databits are : 8
escape is : C-a
local echo is : no
noinit is : no
noreset is : no
nolock is : no
send_cmd is : sz -vv
receive_cmd is : rz -vv
imap is :
omap is :
emap is : crcrlf,delbs,
Removing stale lock: /var/lock/LCK..ttyAM1
Terminal ready
-----------------------------------
I typed "AT" and hit the Enter key but no response was received.
I am wondering if my way of testing the functionality of the Q64 modem is
correct. Hope someone out there can shed me some light.
Thanks
Tong
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|