Re: [ts-7000] Testing TS-GSM1 + Q64 on TS-7260

[Simon Leung <>]

On 05/07/11 11:16, Kok Hua wrote:
> Hi, all
>
> I just received a TS-7260 with TS-GSM1 + WaveCOM Q64 GSM modem onboard. To 
> have a quick test of the Q64 modem, I setup the TS-GSM1 to use COM2 (by 
> shorting JP1 on TS-GSM1, with the rest of the jumpers as factory default). I 
> then tried accessing COM2 using picocom. The output is shown below:
> -----------------------------------
> $ ./picocom /dev/ttyAM1
> picocom v1.6
>
>
When I used TS-GSM1 on TS7800, the device file is not ttyAMx. I had to 
use ttts4. Not too sure about TS7260.





------------------------------------

Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/